alproof
media_pickup_overlap
mpo
Trendsetter_400/800_Proofing
Specifies the amount of media sticking out past the center of the vacuum roller
suction cups after the sheet of media has been picked up from the cassette.
This parameter is used during loading to help calculate the drum position so the
upper edge of the media lines up where we want it to.
int16
18
2 to 50 mm
A easy way to measure this is to use diagnostic commands to grab a sheet of
media out of the cassette with the vacuum roller, then rotate the vacuum roller
("py jog 120") to a handy location and measure it.
cal